Eiki Network Card EVW 100 User Manual

Media Card Imager Kit  
MODEL EVW-100  
INSTALLATION AND OPERATION  
OF THE IMAGER BOX  
This Media Card Imager kit is an optional  
kit to project image data in various format  
and files created with Microsoft PowerPoint  
with our projector. Image data can be easi-  
ly projected just by attaching the Imager  
Box to a projector without any connection  
with a computer.  
This kit is only used for our projectors that  
have a terminal for the Imager Box.  
This manual explains the installation of the  
Imager Box and its operation.  
The data played back through the Imager  
Box is edited with Media Card Imager soft-  
ware included in the kit. For operation of  
the software, refer to separately included  
"Media Card Imager" Owner's Manual.  
OWNER'S MANUAL  
 
Table of Contents  
Table of Contents  
3
3
Contents of Media Card Imager Kit  
Name of Each Part of Imager Box  
Attach Imager Box to Projector  
Remove Imager Box from Projector  
Load and Remove CF Card  
4
5
6
6
Use CF Card Adapter  
7
Handle CF Card and Adapter  
Specifications  
8
9
PLAY BACK IMAGE (OPERATING PROJECTOR)  
PLAYING BACK IMAGE IN THE MEMORY CARD  
PICTURE IMAGE ADJUSTMENT  
PICTURE SIZE ADJUSTMENT  
11  
11  
15  
17  
Contents of Media Card Imager Kit  
The package contains following items. Make sure you have all of it.  
CompactFlash  
(CF) Card  
CF Card Adapter  
Imager Box  
Media Card Imager Kit  
Owner's Manual (this  
manual)  
*CD-ROM  
*MediaCard Imager  
Owner's Manual  
*Those are used for editing image data played back with the Imager Box.  
3
 
Name of Each Part of Imager Box  
Imager Box  
INDICATOR  
LATCH  
BUTTON  
(lights while  
accessing)  
CF CARD SLOT  
CF CARD EJECT  
BUTTON  
CONNECTOR  
PLUG  
SWITCH  
BUTTON  
MOUNTING HOOK  
4
 
Attach Imager Box to Projector  
CAUTION : Turn off the projector when attaching the Imager Box to the projector.  
Do not attach or remove while the projector is turned on. It may damage  
the equipment.  
Remove 4 covers attached to a projector. Insert the  
MOUNTING HOOKs (A) into the projector to the arrow  
direction. (Fig.-1)  
1
Plug the CONNECTOR PLUG into the DVI Terminal of the  
projector while pressing the Imager Box LATCH BUTTON,  
and release it.  
2
(Fig.-1)  
cover  
Remove 4 covers.  
LATCH BUTTON  
(A)  
(Fig.-2)  
DVI Terminal  
COMPUTER IN  
DIGITAL  
VIDEO  
(MONO)  
R AUDIO IN L  
Y
Pb / Cb  
Pr / Cr  
AUDIO IN  
COMPUTER  
S
VIDEO  
R AUDIO OUT L  
The SWITCH BUT-  
TON of the Imager  
Box is placed on  
the switch of the  
projector.  
MCI  
COMPUTER IN  
ANALOG  
USB  
CONTROL PORT  
CONNECTOR  
PLUG  
5
 
Remove Imager Box from Projector  
CAUTION : Do not remove the Imager Box from the projector while the projector is  
on. It may damage data in a memory card and the card itself.  
CAUTION:Removing by force may  
Press the LATCH BUTTON to the arrow  
direction. Then pull and remove the  
damage the Imager Box.  
Imager Box.  
(Fig.-3)  
Press the LATCH  
BUTTON.  
Pull and remove the  
Imager Box.  
Load and Remove CF Card  
Load CF Card  
Insert the CF Card into the CF Card slot  
INDICATOR  
of the Imager Box until the EJECT BUT-  
TON pops out.  
CF CARD  
EJECT BUTTON  
Do not insert it in the wrong way. It may damage  
the equipment.  
Remove CF Card  
Press the CF CARD EJECT BUT-  
TON. The CF Card is released.  
1
2
Pull out the CF Card from the Imager  
Box.  
Insert the CF Card with the  
mark L ahead.  
(Fig.-4)  
Do not remove a CF Card while  
the indicator is lighting. It may  
damage the card and the data  
in it.  
CAUTION  
6
 
Use CF Card Adapter  
CF Card Adapter is used when a CF Card is loaded into the PC card slot of a com-  
puter. You can write and rewrite data into the CF Card with the Adapter through the  
PC card slot of a computer. For operation, refer to the "Media Card Imager" Owner's  
Manual.  
Attach CF Card  
Insert the CF Card aligning the arrows.  
Insert the CF Card firmly into the CF Card  
Adapter, aligning the arrows on the CF  
Card and the adapter.  
Remove CF Card  
CF Card  
Pull the CF Card straight out.  
CF Card Adapter  
IMPORTANT NOTE  
Data stored on a CF Card may be damaged or lost due to physical damage to  
the CF Card or accidental erasure. It is recommended that any important data  
should be copied as a backup onto separate media, such as a floppy disk, a  
hard disk, or a MO disk, etc. We shall not be liable for any damage or loss of  
profits arising from the loss of data caused by the misoperation or the damage to  
a CF Card or its appliances.  
The following may result in damaged or lost data:  
Misoperation of the CF Card.  
Turning off the projector or the computer or removing the CF Card / Adapter  
while the CF Card is in access operations (writing, reading, or deleting the  
files).  
Exposure to a strong static electric charge.  
The CF Card has reached the end of its life.  
7
 
Handle CF Card and Adapter  
G CF Cards / Adapters are high-precision electronic devices. Do not bend, drop,  
apply strong forces or shock or place it where a strong static electrical charge may  
be generated.  
G Do not touch the surface of the contact area with your fingers or allow it to be  
stained with foreign materials.  
G Do not attempt to disassemble or alter CF Cards.  
G Moving CF Card rapidly between hot and cold temperatures may cause conden-  
sation (water droplets) to form on it, leading to malfunctions. Avoid this problem  
by placing the CF Card in a plastic bag and letting it slowly adjust to temperature  
changes before removing it from the bag. If condensation should occur, maintain  
the CF Card at a constant temperature and let the moisture evaporate naturally.  
G Store CF Cards / Adapters in the protective case.  
G Do not use or store CF Cards / Adapters in places subject to the following condi-  
tions:  
strong magnetic fields  
abundant dirt or dust  
high temperatures, high humidity  
ENVIRONMENT of CF Card operation  
Operating Temperature : 41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)  
Storage Temperature : 14 ˚F ~ 140 ˚F (-10 ˚C ~ 60 ˚C)  
8
 
Specifications  
I Imager Box  
Dimensions  
(W x H x D)  
4.61" x 2.76" x 0.75" (117mm x 70mm x 19mm)  
(not including MOUNTING HOOKs)  
Weight  
5.29 oz (150g)  
Operating Voltage DC 5V 450mA, DC 3.3V 600mA  
We recommend you to use a CF card that comes with  
this kit. The following memory cards can also be used.  
Microdrive (lower than 1GB)  
Available Memory  
Card  
We do not guarantee use of any memory card except for  
the above. Some memory cards may not operate properly.  
I CompactFlash Card Adapter (ATA standard  
II)  
Type-  
NOTE ; This adapter cannot be used for other memory cards.  
I CompactFlash (16MB)  
The specifications are subject to change without notice.  
9
 
10  
 
IMAGE PLAYBACK (OPERATING PROJECTOR)  
PLAYING BACK IMAGE IN THE MEMORY CARD  
Attach Imager Box to your projector properly (P5), and turn the projector on. Refer to Owners Manual  
of your projector for operation.  
1
Load a memory card into CF Card Slot of Imager Box. (P6)  
2
Projector automatically turns to MCI mode and shows the image data in a memory card.  
3
NOTE ; Refer to Owners Manual of your projector for location of each button and basic operation.  
MENU BAR  
Press MENU button while in MCI mode.  
SCREEN MENU  
INPUT MENU  
SETTING MENU  
Used to change settings  
of projector or reset Lamp  
Reset Counter.  
(Refer to Owners Manual  
of your projector.)  
Used to adjust size  
of image to Normal  
or True, or expand /  
compress image  
(Digital zoom +/).  
(Refer to P17)  
IMAGE SELECT MENU  
Used to select  
input source  
either Computer  
(MCI) or Video.  
(Refer to P12)  
Used to select image  
level among Standard,  
Real and Image 1 ~ 4.  
(Refer to P15)  
GUIDE WINDOW  
Shows selected  
item of ON-  
SCREEN Menu.  
VIEW MENU  
Used to display  
image data in  
memory card.  
(Refer to P13, 14)  
IMAGE ADJUST MENU  
SOUND MENU  
Used to adjust picture image.  
[Contrast / Brightness / White  
balance (Red/Green/Blue) /  
Gamma]  
Used to adjust volume  
or mute sound. (Refer  
to Owners Manual of  
your projector.)  
a
(Refer to P16)  
11  
 
IMAGE PLAYBACK (OPERATING PROJECTOR)  
SELECTING INPUT SOURCE  
When a memory card is loaded into Imager Box connected to the projector, MCI mode is  
automatically selected. The first Page of the latest Index in a memory card is displayed on a  
screen.  
To switch to MCI mode manually, operate as follows.  
DIRECT OPERATION  
INPUT button  
Choose Computer by pressing INPUT button on  
Top Control or on Remote Control Unit.  
Computer  
If projector cannot reproduce proper image, select  
correct input source through MENU OPERATION.  
Video  
MENU OPERATION  
Press MENU button and ON-SCREEN MENU  
1
INPUT MENU  
will appear. Press POINT LEFT/RIGHT button  
to move a red frame pointer to INPUT Menu  
icon.  
INPUT Menu icon  
Press POINT DOWN button to move a red  
2
arrow pointer to Computer and then press  
SELECT button. Source Select Menu will  
appear.  
Move a pointer (red arrow)  
to Computer and press  
SELECT button.  
Move a pointer to MCI and then press SELECT  
button.  
3
Quit  
Source Select Menu  
Move a pointer to MCI  
and press SELECT  
button.  
Closes Source Select Menu.  
INDEX AND PAGE  
Image data edited with Media Card Imager Select Index  
(software) is Index format consisting of several  
Pages. To project desirable image, select Index  
and then select Page in the Index.  
Index  
Pages in Index  
12  
 
IMAGE PLAYBACK (OPERATING PROJECTOR)  
To project desirable image, select Index and then Page as follows.  
SELECTING INDEX  
Press MENU button and ON-SCREEN MENU VIEW MENU  
1
will appear. Press POINT LEFT/RIGHT button  
to move a red frame pointer to VIEW Menu  
icon.  
VIEW Menu icon  
Press POINT DOWN button to move a red  
frame pointer to Index icon and then press  
SELECT button. The table of Indexes in the  
memory card is displayed.  
2
3
Move a red frame pointer to Index  
icon and press SELECT button.  
Press RIGHT CLICK button on Remote Control  
Unit to stop table display. (1)  
1 When RIGHT CLICK button is  
pressed during table display, each  
Index/Page is displayed as an icon.  
This operation reduces time for  
displaying all image data.  
Press POINT LEFT/RIGHT/UP/DOWN buttons  
to move a pointer to the Index to be projected  
and then press SELECT button. The first Page  
of the selected Index is displayed.  
Press POINT UP/DOWN button to turn  
previous/next Page over. (2)  
2 When ON-SCREEN MENU is  
displayed, Page cannot be turned  
over to next/previous one.  
POINT UP button ··· returns to previous page.  
POINT DOWN button ··· goes to next page.  
SELECTING PAGE  
Press MENU button and ON-SCREEN MENU VIEW MENU  
will appear. Press POINT LEFT/RIGHT button  
to move a red frame pointer to VIEW Menu  
icon.  
1
2
VIEW Menu icon  
Press POINT DOWN button to move a red  
frame pointer to Page icon and then press  
Move a red frame pointer to Page  
icon and press SELECT button.  
SELECT button. The table of all Pages of  
selected Index is displayed.  
Press RIGHT CLICK button on Remote Control  
Unit to stop table display. (1)  
Press POINT LEFT/RIGHT/UP/DOWN buttons  
to move a pointer to the Page to be projected  
and then press SELECT button.  
3
Press POINT UP/DOWN button to turn  
previous/next Page over. (2)  
POINT UP button ··· returns to previous page.  
POINT DOWN button ··· goes to next page.  
Table of Pages can be also displayed by  
pressing SELECT button when Page is  
displayed on full screen.  
13  
 
IMAGE PLAYBACK (OPERATING PROJECTOR)  
AUTO PLAY FUNCTION  
Press MENU button and ON-SCREEN MENU VIEW MENU  
1
will appear. Press POINT LEFT/RIGHT button  
to move a red frame pointer to VIEW Menu  
icon.  
VIEW Menu icon  
Press POINT DOWN button to move a red  
frame pointer to Auto play icon and then press  
SELECT button. Auto play setting dialog box  
will appear  
2
3
On  
Auto play setting dialog box  
Press POINT LEFT/RIGHT  
button(s) to adjust the interval  
and press SELECT button.  
When setting Auto play function on, move a red  
arrow pointer to On,adjust interval (sec.) by  
pressing POINT LEFT RIGHT button, and then  
press SELECT button. Projected image is  
turned over to next automatically with interval.  
This Auto play function can be pausing by  
pressing POINT UP button and restarts with  
POINT DOWN button.  
When auto play setting is previously set with  
Media Card Imager (software), interval set by  
Media Card Imager has priority over interval  
with this menu.  
Off  
To cancel Auto play function, move a red arrow  
pointer to Offand then press SELECT button.  
Auto play setting set with Media Card Imager  
(software) is also suspended by setting to Off.”  
Quit  
Closes Auto play setting dialog box.  
Do not remove a memory card from Imager Box while Auto play function is  
operated or Indicator of Imager Box is lighting or flashing. It may damage a  
memory card or data in a memory card.  
CAUTION  
Before removing a memory card from Imager Box, be sure to set Auto play  
function to Offor interrupt input signal from Imager Box by changing input  
source.  
14  
 
IMAGE PLAYBACK (OPERATING PROJECTOR)  
PICTURE IMAGE ADJUSTMENTS  
IMAGE LEVEL SELECT (DIRECT OPERATION)  
IMAGE button  
Standard  
Select Image Level among Standard, Real, Image  
1, Image 2, Image 3 and Image 4 by pressing  
IMAGE button on Top Control or on Remote  
Control Unit.  
Real  
Standard  
Normal picture level preset on this projector.  
Image 1  
Image 2  
Image 3  
Image 4  
Real  
Picture level with improved halftone for graphics.  
Image 1 ~ 4  
User preset picture adjustment in IMAGE ADJUST  
Menu (refer to P16).  
IMAGE LEVEL SELECT (MENU OPERATION)  
Press MENU button and ON-SCREEN MENU IMAGE SELECT MENU  
will appear. Press POINT LEFT/RIGHT button  
to move a red frame pointer to IMAGE SELECT  
Menu icon.  
1
2
IMAGE SELECT  
Menu icon  
Press POINT DOWN button to move a red  
frame pointer to the Image Level that you want  
to set and then press SELECT button.  
Move a red frame pointer to the  
Image Level and press SELECT  
button.  
Standard  
Normal picture level preset on this projector.  
Real  
Image Level being selected.  
Picture level with improved halftone for graphics.  
Image 1 ~ 4  
User preset picture adjustment in IMAGE ADJUST  
Menu (refer to P16).  
15  
 
IMAGE PLAYBACK (OPERATING PROJECTOR)  
IMAGE LEVEL ADJUSTMENT  
Press MENU button and ON-SCREEN MENU IMAGE ADJUST MENU  
1
will appear. Press POINT LEFT/RIGHT  
buttons to move a red frame pointer to IMAGE  
ADJUST Menu icon.  
IMAGE ADJUST  
Menu icon  
Press POINT DOWN button to move a red  
frame pointer to the item that you want to  
adjust, and then press SELECT button. The  
level of each item is displayed. Adjust each  
item by pressing POINT LEFT/RIGHT buttons.  
2
Move a red frame pointer to  
the item to be adjusted and  
then press SELECT button.  
Contrast  
Press POINT LEFT button to decrease contrast,  
and POINT RIGHT button to increase contrast.  
(From 0 to 63.)  
Selected Image Level (P15)  
Brightness  
Press POINT LEFT button to adjust image darker,  
and POINT RIGHT button to adjust brighter. (From  
0 to 63.)  
Press POINT LEFT/RIGHT  
buttons to adjust value.  
White balance (Red/Green/Blue)  
Press POINT LEFT button to lighten tone of each  
color, and POINT RIGHT button to deepen tone.  
(From 0 to 63.)  
Store icon  
Press SELECT button at this icon  
to store the adjustment.  
Gamma  
Press POINT LEFT button or POINT RIGHT button  
to obtain better balance of contrast. (From 0 to 31.)  
Store  
3
To store manually preset image level, move a  
red frame pointer to Store icon and press  
SELECT button. IMAGE LEVEL SET MENU  
will appear. Move a red frame pointer to Image  
1 ~ 4 where you want to set and then press  
SELECT button.  
Reset  
IMAGE LEVEL SET MENU  
Move a red frame pointer to  
Image 1 ~ 4 and then press  
SELECT button.  
Reset all adjustment to previous value.  
Quit  
Closes IMAGE ADJUST MENU.  
16  
 
IMAGE PLAYBACK (OPERATING PROJECTOR)  
PICTURE SIZE ADJUSTMENT  
This projector has a picture screen resize function, which enables you to display the desirable  
image size.  
Press MENU button and ON-SCREEN MENU SCREEN MENU  
1
will appear. Press POINT LEFT/RIGHT  
buttons to move a red frame pointer to  
SCREEN Menu icon.  
SCREEN Menu  
icon  
Press POINT DOWN button and move a red  
frame pointer to the function that you want to  
select and then press SELECT button.  
2
Move a red frame pointer to the  
function and press SELECT button.  
Normal  
Provides image to fit screen size.  
True  
Provides image in its original size. When the  
original image is larger than screen size, the  
projector automatically enters Digital zoom +”  
mode.  
Digital zoom +  
When Digital zoom + is selected, ON-SCREEN  
MENU disappears and the message D. Zoom +is  
displayed. Press SELECT button to expand image  
size. And press POINT UP/DOWN/LEFT/RIGHT  
button(s) to pan the image. Panning function can  
work only when the image is larger than screen  
size.  
Projected image can be also expanded by pressing  
D. Zoom L button on Remote Control Unit.  
Digital zoom –  
When Digital zoom is selected, ON-SCREEN  
MENU disappears and the message D. Zoom –” is  
displayed. Press SELECT button to compress  
image size.  
Projected image can be also compressed by  
pressing D. Zoom M button on Remote Control  
Unit.  
To cancel Digital Zoom +/mode, press any button  
except D. ZOOM L/M, SELECT, POINT and  
LASER buttons.  
17  
 
18  
 

Eclipse Fujitsu Ten Car Satellite Radio System CD5433 User Manual
Edimax Technology Switch Rackmount Fast Ethernet Switch User Manual
Eizo Computer Monitor LA 131 D User Manual
Electro Voice Stereo Amplifier P 1050 User Manual
Ericsson Cell Phone T68 User Manual
Excalibur electronic Games EI PT1001 User Manual
Fujitsu Laptop SCA1 User Manual
Fujitsu Photo Scanner C150 E049 02EN User Manual
Fujitsu Scanner S300M User Manual
Generac Power Systems Portable Generator 4703 User Manual